服務熱線
13313705507
3500/15交流和直流電源設計為專為3500系列機械保護系統設計的半高模塊。這些模塊必須安裝在機架左側的指定插槽中，機架可以容納一個或兩個交流和直流任意組合的電源。
主要特點：
電源配置：可以在機架中安裝一個或兩個電源，其中任何一個都可以獨立為機架完全供電。
主電源和備用電源：安裝兩個電源時，下插槽中的一個用作主電源，而上插槽中的另一個用作備用電源。如果主電源發(fā)生故障，備份將自動接管。
熱插拔：只要機架中有第二個電源可用，就可以在不中斷系統運行的情況下卸下或插入電源。
電壓靈活性：這些電源可接受各種輸入電壓，然后將其轉換為3500系統模塊所需的適當電壓。
可用電源類型：
通用交流電源
高壓直流電源
低壓直流電源
這種設計確保了冗余和靈活性，有助于3500機架系統的整體可靠性。
The 3500/15 AC and DC Power Supplies are designed as half-height modules specifically for the 3500 Series Machinery Protection System. These modules must be installed in designated slots on the left side of the rack, and the rack can accommodate one or two power supplies in any combination of AC and DC.
Key Features:
Power Supply Configuration: You can install one or two power supplies in the rack, and either one can fully power the rack independently.
Primary and Backup Power: When two power supplies are installed, the one in the lower slot functions as the primary supply, while the one in the upper slot serves as the backup. The backup takes over automatically if the primary power supply fails.
Hot-Swappable: The power supplies can be removed or inserted without interrupting the operation of the system, provided that a second supply is available in the rack.
Voltage Flexibility: These power supplies accept a wide range of input voltages, which are then converted to the appropriate voltages required by the 3500 system modules.
Available Power Supply Types:
Universal AC Power
High Voltage DC Power Supply
Low Voltage DC Power Supply
This design ensures redundancy and flexibility, contributing to the overall reliability of the 3500 rack system.
